Working from home meant we could vary snack and coffee breaks.


Sizes:13×75mm 13×100mm 16×100mm

Clinical useSerum biochemical test, immune examination, etc.

Preparation of specimens: serum

Blood collection volume: 1ml,2ml,3ml, 4ml, 5ml, 6ml, 7ml, 8ml, 9ml, 10ml.

Storage temperature:4~30℃

Vacuum tolerance:±10%

Detailed introduction

Color Tube size/mm Materials Additives Blood collection volume/ml Pcs/carton Carton dimension/cm
Red/reddish orange 13×75 PET/Glass Clot activator 1,2,3,4,5ml 1800/1200 46.5×36×29
Red/reddish orange 13×100 PET/Glass Clot activator 5,6,7ml 1200 46.5×36×24
Red/reddish orange 16×100 PET/Glass Clot activator 8,9,10ml 1000/800 60×40×24


According to customer requirements, customize vacuum, non-vacuum, high altitude test tube to adapt to customer local temperature, humidity, altitude and other climatic conditions, to meet the requirements of special inspection equipment and operation mode.

Operating instruction

  1. Immediately after blood collection, the blood should be mixed upside down for 5 times and 8 times, then centrifuged for 5 to 10 minutes (room temperature) , wait for 10 to 30mintues, and the bleeding should be separated and cleared.
  2. If the vacuum blood collection does not reach the required amount of blood collection, loosen the head cover to remove the residual vacuum in the tube


High quality serum can be obtained to prevent the communication between blood cells and serum, to ensure the stability of serum chemical composition and no significant changes in chemical composition, no need to use tools to transfer serum, and the use of characteristic white lazy gel, centrifuge serum, separated glue, blood cell formation obvious easy to divide into trichromatic zone, clear and so on.




Fill out this field
Company *
Fill out this field
Email *
Please enter a valid email address.
Fill out this field
Message *
Fill out this field

You May Also Like